Paintball Guns and Gear forums banner

1 - 10 of 10 Posts

·
Registered
Joined
·
10 Posts
Discussion Starter #1
im using a Eos with virtue board and eyes with a Dye asa...
may i know what the best setting that i can achieve...

anyway,can i use a ion regulator for my eos??
 

·
Registered
Joined
·
10 Posts
Discussion Starter #3
the manual said that its operating pressure is between 220-280psi (if not mistaken)...
but as im using the Ion reg,the gauge cant be increase above 200psi...
 

·
Registered
Joined
·
10 Posts
Discussion Starter #6
its shooting alrite...
but my current setting allows me to fire about 180-200 fps...
and dat is jus not enough
 

·
Registered
Joined
·
10 Posts
Discussion Starter #8 (Edited)
if i max the reg which is at 200psi,there will be drop off..
tried to increase the ABS,but no difference...
so im currently operating at 190psi which is ok but only get 180-210fps while manual operating is about 220-280psi...
 

·
Paintball?
Joined
·
7,646 Posts
If you're shooting at legal field speed, than there's no problem

If not, go back to the stock reg, it's fine and has a stiffer spring inside that lets it go to higher FPS
The stock reg is actually the same reg design used on the LUXE, so it's definately not a bad reg, just has a long breakin period
 

·
Registered
Joined
·
10 Posts
Discussion Starter #10
yes im shooting at a legal field speed..bt my legal field speed is 290fps while im shooting at 180-200 fps onky..
thanks all for the info..
will switch back to my stock reg
 
1 - 10 of 10 Posts
Top