Paintball Guns and Gear forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
Hello all long time trolley first time poster. I could not find any info anywhere on this.
My nephew wanted to play so I had an old TL that I threw a smartech frame from eBay on. Now I am thinking I just helped grow the sport..I was wrong.
The grip fires fine through all 3 modes off the gun. Releases the striker with no air. But if you add air when the gun recocKS the seer won't release the striker on its own. But if you push the disc on the (solenoid?) The seer drops and the striker recycles. I thought maybe not enough juice so I tried 2 more 9 volts no go. I ran out and bought the $13 energizer lithium POs still no joy. However I then found if I pull the bolt back further it will release on a trigger pull. But just the once some times twice but never a third.
I changed out all the orings with new, I used bottle orings cause it's all I ever used in this gun since what 98 99 when it came out. I have never used this trigger before and the guy at the shop told me he couldn't fix it because he had a amg lcd doing the same thing with no clue why.
Any hel p would be great.
 

·
Registered
Joined
·
2 Posts
Discussion Starter #3
check your main spring and spring guide.

older spyders also need those special 9.6v batteries
I change that spring and the valve spring tried every combo. The smartens trigger is newer I just put it on a body I had. I'll try hitting it with 10vs this weekend
 

·
Administrator
Joined
·
14,012 Posts
ya my bet is not enough juice to the noid.

can you hear it trying when you pull the trigger? is there a click at all? also, have you decreased your main spring at all? ifyou have too much force on the sear it can not fire sometimes
 
1 - 4 of 4 Posts
Top