Paintball Guns and Gear forums banner

1 - 16 of 16 Posts

·
not really named bob...
Joined
·
2,368 Posts
Discussion Starter #1
i cant find this info anywhere so i was wondering if anyone could answer it for me
what is the weight of the dye trix?
how is the efficency of one, how many shots/3000PSI fill(they only fill that far at any place around here)?
how many BPS can it achieve stock?
are there any upgrades to improve efficency?
what is a bolt kit and what does it do?

Thanks.
 

·
Registered
Joined
·
1,144 Posts
weight- Around 3.8lbs.
Efficency- off a 3000 fill lile 750-800.
BPS-As fast as you can pull, the board is uncapped. I walk like 14bps, rake 21bps.
Bolt Kit- There are many bolt pieces and bolt kits such as the evolve bolt kit which will get you around 2000 shots off a 4500 fill.
The Bolt kit- lol its was makes the gun shoot, I don't even know how to answer that.
 

·
Registered
Joined
·
224 Posts
well there is nothing you NEED just things that are nice...i would say to play with it then come back here and tell us your biggest problem with the gun ie: accuracy, speed, consistancy, efficiency, etc...
 

·
Registered
Joined
·
224 Posts
speed: tadao/ halo b
accuracy: barrel/kit
efficiency: bolt kit
less shootdown: bolt kit/ bolt pieces
more consistant: new reg (althought the hyper 2's are really good)/ new lpr
uh...then the rest is just prefference...like rail/uni or vert frame or trigger or 15*asa (ewww)
 

·
not really named bob...
Joined
·
2,368 Posts
Discussion Starter #13
i dont want to register, but from what ive seen its about the same weight as a stock bodied 2k4 VF.
so basically, the major advantage of the matrix is no recoil and the disadvantages are weight and efficency(till you get a bolt kit)? what about settings, is it basically just turn on and shot or is it a bit more complicated then that?
 

·
0ld Sk00l
Joined
·
3,773 Posts
Well. With a tadao board, It's just turn on and shoot, b/c it automaticly set's ur front and back pulses (dwell) while the stock boards don't. also, when you break the trix in and set the LPR right, it will NEVEr break paint, cause the bolt will just bounce off of it

and. a trix is more reliable. but, IT's basicly personal choice. I like the Trix more then cockers
 
1 - 16 of 16 Posts
Top