Paintball Guns and Gear forums banner

1 - 4 of 4 Posts

·
Screaming Koala
Joined
·
4,685 Posts
Not quite.


This may not apply to 99's, but it won't hurt to check.

Take the grip off. Now look inside it at the trigger. There should be a screw on the top of it. If you loosen this screw, the trigger will rest closer to the switch. Give it a turn or so, and then hold the frame up to the body to check the fit. With the stock switch it is best to have a small space between the trigger and the switch to be sure it will always have space to reset.

If your trigger doesn't have a screw to adjust it, you can add one. Otter's Custom site has a good guide on how to do it and what is needed.

Changing the switch can make the pull lighter oe easier, 80gram, 50g or even less like 25g. The stock swith is around 250grams activation weight.
 

·
Banned
Joined
·
76 Posts
Discussion Starter #4 (Edited)
kool. befor i heard someone say there was a screw... but i thought it was just abouve the trigger so i loosend one of those and my thing fell off..... i didnt think of in the trigger frame thing.. thanks.

**EDIT** nevermind that didnt work either.
 
1 - 4 of 4 Posts
Top