Paintball Guns and Gear forums banner

spyder imagine burst and auto settings?

12845 Views 19 Replies 12 Participants Last post by  Javaman
i currently have a spyder imagine 03 electronic marker and i am trying to figure out how to switch it to full auto and burst mode.... there is a button on the back of the grip that i assume would do this, but i cant seem to get the modes to switch. the gun is said to have burst and full auto modes but the manual says nothing in it about this. if anyone could help me out with this it would be greatly appreciated.
1 - 20 of 20 Posts
press it once and the lower light will turn yellow. Press it agian and it will turn red on full auto.

To change fire speeds press and hold it until it flashes. Then press it once to change the middle light red. Then press and hold it to make it stop blinking and vice versa to get it to fire slowly
CKiller222 said:
press it once and the lower light will turn yellow. Press it agian and it will turn red on full auto.

To change fire speeds press and hold it until it flashes. Then press it once to change the middle light red. Then press and hold it to make it stop blinking and vice versa to get it to fire slowly
Basically. You have to do it that way. Kinda meh but w/e its a spyder. Plus you really dont want a auto gun. Chops like a mo.
^^^why would it matter where he bought it?
Walmart sometimes takes out the piece that allows it to go full auto. If they did, you'll have to buy a new one.

Next time, post this in the Spyder Forum.
I was just talking about the paintballs there. They ussually come broken and deformed. Then the paint leaks to the other pb's then ha crap paint. Plus the shells are really weak.
moved.
This is not to be moved! This is about a spyder. It stays with fiki... Only newb questions are like, how do u load the pistol? or what do the bullets coast?

Avanters
fiki is the coolest guy in the world!!
Walmart cannot not sell anything that shoots full auto so they have special made guns with only semi auto mode.
Mooseman1710 said:
fiki is the coolest guy in the world!!
Why are you spamming?
Because he thinks he can get away with it as long as Fiki's all good with it. Hehehe.

Wal-Mart doesn't have special-made guns that are somehow worse than normal ones. They simply remove the little black thing, thus disabling full auto.
Mooseman1710 said:
fiki is the coolest guy in the world!!
LoL why are you spamming. rofl. Just cut it out a bit. P.S. I got you imagine and im fixing it as we speak.
There's one mode, either semi, burst, or auto, that won't let you switch to the ROF mode with by holding down the button. I can't remember for sure which it was, perhaps Auto?
if you buy the gun from wal-mart, yyou cant get any modes besides semi, just go to radioshak and buy a jumpeer abd place it where the stock one would be
what kind of jumper would be needed to replace the stock one and allow me to go full auto and burst?
im not 100% sure wat king of jumper it is, but if you bring your trigger frame to radio shack, they could find one an instal it for you
Found it! It's the mode that you get when first turning on the marker, 13bps semi. Bottom LED=Green=Semi, Middle=Red=13bps. You can't change the firing speed with this setting. You need to switch to burst or auto mode first. (which switches ROF back to 7 or whatever the low one is)
If you try to change the ROF with M=Red and B=G all that happens when holding down the mode button is that the green starts flashing. As soon as you let go it stops flashing and you are not in the ROF mode. This is with the non tourny locked/non walmart version.
About the jumper.... All it takes is a standard computer jumper either off of a motherboard or disk drive. I would recommend getting one from Radioshack instead of randomly picking one out of your computer. :D
1 - 20 of 20 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top