Paintball Guns and Gear forums banner

1 - 14 of 14 Posts

·
Registered
Joined
·
16 Posts
Discussion Starter #1
I bought a an MR2 back when they first came out. I haven't used it for awhile until now. The problem had developed last year so I do not remember the circumstances.

SO, the e-trigger will not switch to anything except semi-auto. It will switch off though. No matter where I slide the switch the light stays green and it will not shoot burst or full auto.

What could be my problem?
 

·
Registered
Joined
·
16 Posts
Discussion Starter #4
I already tried that. And I charged the battery up so I do not think that is it because it shoots in semi-auto like it is supposed too, it does not sound weak like it is about to die.
 

·
Paintball?
Joined
·
7,646 Posts
So the jumper is installed, the battery is fully charged, and you tried taking it off and leaving it our for a while before replacing it?

If so, than you might have to fiddle with it a bit more
 

·
Registered
Joined
·
16 Posts
Discussion Starter #6
What is a tourney lock jumper?

I have no idea about electric guns I mostly use Tippmanns.
 

·
Paintball?
Joined
·
7,646 Posts
That's probably it than

There's a little red plug that connects to two pins on your board
If that has been removed, than you will be stuck in "tournament mode" which is semi only
 

·
Registered
Joined
·
16 Posts
Discussion Starter #8
Haha what do you know I found the two little pins! Yes the connector was off, I can not find it though. Where do you think I can get one, short of a computer hardware store?
 

·
Registered
Joined
·
16 Posts
Discussion Starter #10
Alright cool. Thanks for all the help TheAznInvazn!
 

·
Registered
Joined
·
16 Posts
Discussion Starter #13
Haha hell yeah I'll just tape on some tin foil!

Jk it is any easy enough trip to buy the little part.
 

·
Registered
Joined
·
16 Posts
Discussion Starter #14
I bought the part and it is fixed.
 
1 - 14 of 14 Posts
Top