Paintball Guns and Gear forums banner
1 - 4 of 4 Posts

· Registered
Joined
·
8 Posts
Discussion Starter · #1 ·
I got a problem with my friends spyder victor. It drops balls out of the barrel when it is barrel down and it shoots more than one ball at once sometimes. A friend told me it was the ball stop and I should oil it or get a new one cuz the new version of the stop isnt that good. What causes it to shoot more than one? Is the ball stop causing this or could it be something else? It shoots to the left too but I dont want to tell the owner cuz Im playing against him.......jk. What could that be?
 

· Registered
Joined
·
3,200 Posts
ok, balls are rolling out of the barrel because of teh ball detent, which is probobly broken, right under the feedneck there is a black rectangular thing, which is the detent cover, unscrew that and you will see a little ball, check to make sure it is not pushed in or look for damage, if there is no ball, i would call kingman customer support and im sur ethey would be happy to give you a new one.

And as for the balls goin left, this is probobly due to a bad paint to barrel match, put one of the balls on the barrel and if it gets stuck the paint is to big, and if it rolls through easily it is to small, just try different paints to fing one wich fits
 

· Registered
Joined
·
1,998 Posts
Your friend was right, it is the ball detent. It is the thing that stops the balls from rolling out of the barrel once they drop. Just take it off and oil it a little bit and move the ball around to make sure it isnt stuck, and you should be good to go.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top