Paintball Guns and Gear forums banner

1 - 7 of 7 Posts
2

·
Guest
Joined
·
0 Posts
Any standard drop should be compatible, dunno if the screws are but the holes on the frame should be good for any drop or rail.
 
2

·
Guest
Joined
·
0 Posts
oh i see what you mean. Yeah kingman has a thing for making non-standard things. Let's see if our VS2 owners can field this one.
 

·
Registered
Joined
·
9 Posts
What Drop Forwards are compatible with the VS2. Thanks.
You may have a hard time finding something that is exactly equivalent. I purchased a CP bottom line that had a dovetail receiver at the ASA adapter end. I then ground down the front of the dovetail receiver so that the ASA fit comfortably on the dovetail.

I could not find a drop forward that would slide into the existing dovetail on the bottom of the VS2, so I just butted the flat drop forward top mount up against the bottom of the dovetail and screwed it in. Oh, I had to drill out my holes for the inline screw set up. All the drop forwards I looked at came with offset screws.

Basically, for the VS2 and any other dovetail ASA receiver spyder's, you may have to do a little work to get it to fit.

Good luck!

Zack
 
1 - 7 of 7 Posts
Top