Paintball Guns and Gear forums banner

1 - 6 of 6 Posts

·
Registered
Joined
·
1,039 Posts
Discussion Starter #1
I cant install my sweetspot I thot all i had to do was take out the old trigger and in with the new, but for some reason with or without the little spiring it moves around.
 

·
Registered
Joined
·
208 Posts
Have you adjusted the det screws yet? If not that should be all you need to do.
 

·
Registered
Joined
·
184 Posts
How do i adjust them? By puttin the screw as tight as it goes?
Only if you don't want the trigger to move, at all.

The top screw adjusts the trigger's forward sweep. Adjust it so that, with the frame installed on the body, the trigger is about the thickness of paper away from the switch's button.

The lower screw adjusts the trigger's rearward travel. Adjust it until the trigger moves just enough to reliably trip the switch, but no further.
 
1 - 6 of 6 Posts
Top