Paintball Guns and Gear forums banner

1 - 11 of 11 Posts

·
Premium Member
Joined
·
9,222 Posts
It's name is Bob. It likes walks in the moonlight, candlelit dinners, and psychopathic rampages through opponents lines. :hug::hug:wave:thumup:

It's a Mini. Made by Invert. Other than a few minor changes to the design, there are no year specifics. If you bought it new it's a v4. Otherwise I think the dust black wasn't available until v3, so it could be a v3 or v4. Could be wrong on that though, my memory isn't exactly what you'd call perfect.
 

·
Administrator
Joined
·
14,020 Posts
its defiantly a gen 2 and thats the important part, most likely a v4

minis are good shooters, just make sure and read the manual cover to cover, keep the spare o-rings that should have come with it on you and never, EVER, take the regulator apart, bad idea.

Throw a HPA tank and hopper on it and have fun!
 

·
Administrator
Joined
·
14,020 Posts
Cuz invert did a piss poor job at designing it. If you really feel the need you can get part way into it to lube it but come talk to me before hand and ill walk you through it. But beyond that if you keep going its fairly certain that you will break something taking it apart. And the only 2 ways to fix it are to buy a new one or send it into kee
 

·
Registered
Joined
·
16 Posts
Are you talking about the reg in the grip frame? If so ive had mine apart and put back together with ease. Works like a champ, no leaks at all
 

·
Administrator
Joined
·
14,020 Posts
there is no reg in the grip frame, that is just a air transfer tube, basically just a tube that wastes space and makes me wonder why they couldnt put the reg in there, the reg is below the grip frame, has the guage attached to it, it also serves as a ASA
 

·
Registered
Joined
·
16 Posts
Oh cool. Well thats what I was kinda figuring but wasnt sure. How much of a pain in the a$$ is it to change the asa? Cuz I was plannin on buying the empire on/off asa
 

·
Registered
Joined
·
128 Posts
easy to swap it out, but too expensive if you ask me, better to run a inline on/off rather than have to buy a new reg just to get a intagrated on/off
I'm interested in hearing more about this in line on/off. How do you do it, what will I need any links to a write up or info on what exactly it is.:)
 

·
Registered
Joined
·
128 Posts
1 - 11 of 11 Posts
Top