[Error]

I want a Thermal Mask because mine fogs all the time. I was thinkin with like fans in it. How much would that cost?

 

[Avanters]

Well the Dye Invision has a Turbine fan you can buy. I bought them. It works great! Keeps you cool and it keeps fog out! Go for that choice! The mask is around 70 dollars, and the fan is about 30-40 dollars.

Goodluck!
Avanters

 

[Kuby]

i would go with a profiler from V force very nice just as much as a invasion with a fan

honestly i feel you dont need a fan........but i guess if you leave in really humid areas then i would help so

 

[BUBBASR.]

fans are crap. I had one on a flex didn't work tried the ones on the invisions and it was worthless. Get a flex 7 ize from any site online if they don't have one its terrible. The flex 7 comes with 2 lenses one tinted one clear both are thermal. I have played some hot humid days and it always did me fine. OR i have a pair of dye invisions in maroon/red witha smoke and clear lenses.
http://pbnation.com/showthread.php?s=&threadid=512617
sellin for 55 bux or so.

 

[Error]

ok without a fan what would be a good mask that wond fog up.

 

[BUBBASR.]

ok I just said in my post above 2 great masks that have no fan unless you buy the aftermarket fan are the jt flex (7) or the invisions. If you send my your aim name or any instant messenger name to my private message section I will fill you in on all kinds of masks and answere any questions.

 

[PaintGirl]

admin posted but no move to masks... hmmm

 

[Error]

if I had posted this in the masks section there probably wouldn't have been a reply for a day.

 

[PaintGirl]

that doesn't matter you can't post in a spot because you want more info...

 

[Error]

fans are crap. I had one on a flex didn't work tried the ones on the invisions and it was worthless. Get a flex 7 ize from any site online if they don't have one its terrible. The flex 7 comes with 2 lenses one tinted one clear both are thermal. I have played some hot humid days and it always did me fine. OR i have a pair of dye invisions in maroon/red witha smoke and clear lenses.
http://pbnation.com/showthread.php?s=&threadid=512617
sellin for 55 bux or so.

I find that most only come with one lens can I buy just a lens if I want another one later?

 

[crazymofo1919]

get a jt flex 7 i love mine, if you get hit in the mask it will most likley bounce

 

[Error]

I don't like the look of the Jt flex 7.

I like the JT Proteus II but what does everyone else think of them? are they comfy, and do they have a wide view?

 

[janiboy088]

i would just get the anti fog spray, thats wut i use and it works really well

 

[Error]

No I don't want that.

I was asking what people think of that mask and with the proteus II I can get a fan. I have uesd anti-fog spray before and I would much rather get a new better mask and with a thermal lens and I have heard this one has a wide view.

 

[Pr0ph3t]

I'd go with a Profiler or Invisions. Both good goggle systems, both thermal. A good mask is expensive, but the best piece of equipment you can buy.

 

[PaintGirl]

profiler = not thermal

 

[KingFikiElectra]

I would get a jt Nforcer 35$ for thermals. Not bad either.

The fan is just a waste. I wouldent get it.

 

[Denzil]

A fan??? Who needs a fan? It's just added wait to your headgear. Just get a thermal mask and you should be fine.

 

[Smitty]

You can get a thermal lens for just about any mask, just whatever you do, dont use anything other than water or antifog lens cleaner. Windex will destroy the thermal layer on the lense, something I learned not too long ago. When I sprayed it on there you could see the thermal layer start to wrinkle up on the lense I was horrified. So I ended up using a chemical to totally remove the thermal layer and now Im stuck with a non thermal lense until I get a replacement. Im gonna get one of the chrome colored lenses, they are sweet looking.

 

[¤COLD¤]

dont get invisions fans they are crappy,go with invisions tho they are nice masks,