Paintball Guns and Gear forums banner

1 - 5 of 5 Posts

·
ICD>sp
Joined
·
676 Posts
Discussion Starter #1
if you are a noob and you got leaks and and you bought the gun less than a year ago then call 1800-4jtgear they will tell you what to do. if not then

STEP 1 check if bolt is in right the hole should face down

step 2 buy a replacement parts kit and replace your cup seal

step 3 strip your ca adapter and your volumizer and x chamber check if all of your o rings are there and lubed

other prolbems

not recocking bad valve call 18004jtgear it took me a long time to figure out how to get the valve ask for customer service they will help you

if prolbems are still happening call up jt and ask them but this is what i had to do to get mine working (well not all of it but some i had to do to get it working)

hope this helps thumup:
 

·
Registered
Joined
·
440 Posts
Most of the time it's the cup seal other areas are where the air line threads in.replace the cup seal and use teflon tape.orings on the bolt may loose velocity but will have nothing to do with air fizzing out of your gun.When in doubt call or Airsmith time.
 
1 - 5 of 5 Posts
Top