Paintball Guns and Gear forums banner

1 - 13 of 13 Posts

·
Registered
Joined
·
20 Posts
Discussion Starter #1
now with that same gun i fixed the leak in the bolt but now i have a trigger problem, i fixed the leak in this gun now and i gas it up turn it on and the put balls in it, the bolt cocks there is air supplied everything, the light is green and i goto shoot it and nothing happens, the trigger makes a clicking noise but no fire nothing, i was wondering if anyone could help me out. thanks
 

·
Banned
Joined
·
14,001 Posts
hmmm, i cant remember if it does of not but if the dm4 has the on/off under the barrel make sure its on, im assuming you know you have air, the regs could be turned down too low.

what does the light do after you pull the trigger?
 

·
Registered
Joined
·
20 Posts
Discussion Starter #3
it wont do anything itll just be green and stay green also the trigger doesnt retract either i pull it and itll stay pulled i feel like there might be a broken spring or somethin and i havent gotten into the frame yet because im not exactly sure how to do that i see the one screw on the back of it but i cant find the front one. and yes i have the air turned on because i hear it go through the gun and the bolt cocks and everything. im not sure exactly whats going on with it. maybe that could help you more to help me? haha
 

·
Banned
Joined
·
14,001 Posts
the access for the other screw i believe is in the trigger guard, the size is the same as the one in the back, look for a hole near the front of it, thats where you insert the allen wrench, also, try turning the eyes off and firing it
 

·
Registered
Joined
·
20 Posts
Discussion Starter #6
i got into the frame, most of these screws are stripped so i changed em out, had to use a star wrench. opened it up and there was not even a spring for the trigger, and i am pretty sure you need a spring to shoot so i ordered one, also i noticed that the wires were pinched not really severed but there was definitely some wear on the outside of them, hopefully this does not yield a problem
 

·
Banned
Joined
·
14,001 Posts
im not positive about the 4 but at least on my 6 you dont need the spring at all, i dont use it, the switch offeres enoufgh of a push to return the trigger.

if you hear the noid clicking away the wires are not the problem, i still need to know what the light does after you pull the trigger
 

·
Registered
Joined
·
20 Posts
Discussion Starter #8
well it seems as if the spring should push up against the orange part of the noid and that is just completely missing making me think that it is the spring. i said that nothing happens with the lights, when i dont have gas on it and its red ill pull the trigger and itll just remain solid red, when it is gassed up with a ball in the chamber the light is green ill pull the trigger and the light will remain a solid green.

yhst-51921239013360_2043_42234254.gif


where the orange is, is where it looks like the spring should push up against and the part to the right of it the black part is where the trigger screw goes, on the schematics for the DM4 in the manual it shows a spring in the trigger so when i get that spring i shall see if that was the problem if not i have no idea then


thank you a lot for all of your input though, it is greatly appreciated.
 

·
Banned
Joined
·
14,001 Posts
um, im not going to claim to be a dm4 expert but i believe thats a manual override for the solinoid, that piece you have is the solinoid and it is controled by the board, if you can reach that button while its gased up try pushing it and see if it fires.

O! one thing just came to mind, you said you can hear it clicking, but is that the switch on the board clicking or the noid itself? with the noid out of the marker plug it into the board and pull the trigger a few times with the eyes off, see if it is clicking away like it should be
 

·
Registered
Joined
·
20 Posts
Discussion Starter #12
yea i didnt plan on dry firing it, how would i take the noid and keep it plugged in? just remove it from the area and plug it into the board?
 
1 - 13 of 13 Posts
Top