Paintball Guns and Gear forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
41 Posts
Discussion Starter #1
Let me start with my karni project. It's still a project because it's not quite done just yet.

This is how I received it. I added a barrel, hopper and tank for this picture.


You probably noticed something a little different about this karni body. It was pulled off the line at the milling factory before it was drilled and cut for eyes or a detent. I decided I didn't like the check-it unimount and swapped it for a CP on off and micro rail, put on a freak barrel instead of the ancient Bob Long one, dumped the macroline for nylon braided and black fittings and finally added a Rainman Hitman plate to the pump handle and a shocktech snatch grip and beavertail.



The anodizing was done by 125Customs. I kept the color simple so it would compliment the body and not make it too busy. Plus by keeping the changeable parts of the gun black I can swap them out easy enough.



Second is my Kapp Flame. The body is undrilled as well. I went with stainless braided hose to match the color scheme of the gun. Black macro line just wouldn't work in this case.

 

·
Registered
Joined
·
6,346 Posts
Lawlz at Matrix pwning above.

10/10 for both, very sexy sexy guns.
 

·
Paintball?
Joined
·
7,646 Posts
<3 Martix and his new found Mod skills

10/10 for Karni, red/black is the way to go >.<
9/10 for Kapp, for some reason I just don't like the looks as much
 
1 - 4 of 4 Posts
Top