question about 98 custom pro - Paintball Forum - Paintball guns and gear forums

Reply

Old April 12th, 2007, 03:42 PM   #1 (permalink)
Registered User
 
Join Date: Apr 2007
Posts: 1
question about 98 custom pro

Im sorry if this a newb question but I got my 98 custom pro a few days ago and was wonderin what the little flat head screw on the right side of the gun above the safety is?
tigermax14 is offline View My Blog!   Reply With Quote
Sponsored Links
Advertisement
 
Old April 12th, 2007, 04:25 PM   #2 (permalink)
Screaming Koala
 
Torch's Avatar
 
Join Date: Nov 2004
Location: Bentleyville, PA
Posts: 4,685
Blog Entries: 1
Do you have an RT (Response Trigger) installed?

It sounds like either one of the air fittings for the kit, or a plug installed because there isn't an RT.
__________________
"RD&D - Research, Development, and Design. - If its not broken, fix it anyway."
T.O.G. #131 - P.O.G. #16 - C.O.G. #145
Rate the:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
-
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
-
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
-
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Torch is offline View My Blog!   Reply With Quote
Old April 12th, 2007, 09:19 PM   #3 (permalink)
Pump is Better
 
the_real_kaz's Avatar
 
Join Date: Nov 2005
Location: Wisconsin
Posts: 3,424
Its a plug installed because there isn't a cyclone feed on it. You can take it out and attach the cyclone feed system to it and it's from that point the air goes to the cyclone.

Come on torch you should know that, the RT dosn't have a plug because it is run internally. I'll let this one slide though. lol
__________________
-Kaz-
Rate My
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Quote:
Kaz knew what I was talking about. Quest owners just know.
the_real_kaz is offline View My Blog!   Reply With Quote
Sponsored Links
Advertisement
 
Old April 13th, 2007, 12:29 AM   #4 (permalink)
Screaming Koala
 
Torch's Avatar
 
Join Date: Nov 2004
Location: Bentleyville, PA
Posts: 4,685
Blog Entries: 1
The air line is external, comes out of the power tube.
__________________
"RD&D - Research, Development, and Design. - If its not broken, fix it anyway."
T.O.G. #131 - P.O.G. #16 - C.O.G. #145
Rate the:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
-
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
-
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
-
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Torch is offline View My Blog!   Reply With Quote
Old April 13th, 2007, 12:46 AM   #5 (permalink)
Established Member
 
Ice98's Avatar
 
Join Date: Jan 2007
Posts: 319
the RT on the 98 custom has an external hose...
__________________

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
+15/-0, +64/-0 (ebay)
~+-{Paypal Verified & Confirmed}-+~

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Ice98 is offline View My Blog!   Reply With Quote
Old April 13th, 2007, 01:22 AM   #6 (permalink)
Registered User
 
Join Date: Apr 2007
Posts: 17
I swear the diagram in the manual is the most misleading thing ever about that screw. I could have sworn, for the first week at least, it was the velocity adjustment screw. When I switched power tubes for my Cyclone feed I thought I had to take out the (now known as velocity adjustment screw) weird screw that seemed to be holding the valve in the power tube. Of course thinking this locked the valve in the power tube I made sure to tighten it the whole way down upon reassembly.

You should have seen me fine tuning that screw above the safety when my gun was just farting out little tufts of air later. I couldn't figure out why it didn't work. I guess I figured it out because it's fine now but it's never been chrono'd so who knows if I'm shooting rocks at my friends or not. That would explain frequent bruising...
CptIndica is offline View My Blog!   Reply With Quote
Old April 13th, 2007, 09:15 AM   #7 (permalink)
Pump is Better
 
the_real_kaz's Avatar
 
Join Date: Nov 2005
Location: Wisconsin
Posts: 3,424
Ok here's the hose I was talking about not being external.


Anyway, my point was that the screw he's talking about isn't for the R/T as you can see in the picture it's not very close to the saftey and it's deff not for velocity. Glad you got it figured out.
__________________
-Kaz-
Rate My
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Quote:
Kaz knew what I was talking about. Quest owners just know.
the_real_kaz is offline View My Blog!   Reply With Quote
Old April 13th, 2007, 11:24 AM   #8 (permalink)
Registered User
 
Join Date: Apr 2007
Posts: 17
Nice picture. Is there a hose that connects to that little silver valve on the outside and runs to the screw on the power tube? I always thought that was how it worked and that you would need some sort of special attachment if you wanted to use a Response Trigger and a Cyclone feed at the same time.
CptIndica is offline View My Blog!   Reply With Quote
Old April 13th, 2007, 01:47 PM   #9 (permalink)
Screaming Koala
 
Torch's Avatar
 
Join Date: Nov 2004
Location: Bentleyville, PA
Posts: 4,685
Blog Entries: 1
Yea the RT connects to the same outside port the cyclone does. You need a little T fitting to use them both at the same time.
__________________
"RD&D - Research, Development, and Design. - If its not broken, fix it anyway."
T.O.G. #131 - P.O.G. #16 - C.O.G. #145
Rate the:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
-
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
-
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
-
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Torch is offline View My Blog!   Reply With Quote
Reply



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


VerticalSports
Baseball Forum Golf Forum Boxing Forum Snowmobile Forum
Basketball Forum Soccer Forum MMA Forum PWC Forum
Football Forum Cricket Forum Wrestling Forum ATV Forum
Hockey Forum Volleyball Forum Paintball Forum Snowboarding Forum
Tennis Forum Rugby Forums Lacrosse Forum Skiing Forums
Copyright (C) Verticalscope Inc Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc. Search Engine Optimization by vBSEO 3.6.1